ETAP - Review: ETAP - Review: ETAP - Review:
Real-Time Projects Training
Real-Time Project Training: Load Flow, Short Circuit & Relay Coordination Studies Using ETAP
Learn how to perform end-to-end power system studies the way it’s done in real projects. This live course takes you step-by-step through ETAP modeling, load flow optimization, fault current analysis, and relay coordination setup — with a clear focus on industry-ready skills.
Pre-Recording | Life time Access | 13 Hours Session | Quick Start Guide
What You'll Learn
This program is built to give you practical system study expertise — not just button-click training. You’ll learn how to model, simulate, and document power system studies in a structured way.
ETAP System Modeling
- Creating SLDs from input data
- Applying motor lumping and equipment parameters
- Ensuring modeling accuracy
Load Flow Analysis
- Preparing IRS and simulation inputs
- Running operating scenarios
- Voltage profile studies & transformer tap adjustments
Relay Coordination Study
- Overcurrent & earth fault relay settings (50/51, 50N/51N)
- Plotting TCC curves in ETAP
- Achieving proper selectivity
Study Report Preparation
- Formatting observations and recommendations
- Building study reports for professional review
- Creating client/utility-ready documentation
Ready to take the first step in Load Flow, Short Circuit & Relay Coordination Studies Using ETAP
Course Curriculum
-
-
Day 13: Strong vs Weak System, Reactive Power Generation and Voltage Control, Generator Operation Modes
1
Lesson
-
Strong vs Weak System, Reactive Power Generation and Voltage Control, Generator Operation Modes
Start
-
Day 14: Beyond ETAP - What you need to look at? Reliability, Economics, Single Point Failure
3
Lessons
-
Configuration Optimization
Start
-
Start
-
Start
-
Day 15: Q&A - Power factor Requirements in RE and Industries, Generator Modes, Protection, APFC, Transformer OLTC
3
Lessons
-
Power factor Requirements in RE and Industries, Generator Modes,
Start
-
APFC, Transformer OLTC Upper Band and Lower Band
Start
-
Start
-
Day 16: Exploring Recommendations from Load flow
1
Lesson
-
Exploring Recommendations from Load flow
Start
-
Day 17: Concluding Load Flow and Starting SC
1
Lesson
-
Concluding Load Flow and Starting SC
Start
-
Day 18: Short Circuit Studies - Intro and Q&A
1
Lesson
-
Short Circuit Studies - Intro and Q&A
Start
-
Day 19: Short Circuit - Types of Earthing and Selection - Solid, Resistance and Unearthed
2
Lessons
-
Short Circuit - Types of Earthing and Selection - Solid, Resistance and Unearthed
Start
-
Start
-
Day 20: SLG Current Higher than Three Phase, LL vs LLL and LLG, Unbalanced Short circuit
3
Lessons
-
SLG Current Higher than Three Phase, LL vs LLL and LLG, Unbalanced Short circuit
Start
-
Start
-
Start
-
Day 21: Review of Short Circuit Report
1
Lesson
-
Review of Short Circuit Report
Start
-
Day 22: Short Circuit - Grid X/R Ratio
1
Lesson
-
Short Circuit - Grid X/R Ratio
Start
-
-
Day 24: Short Circuit Studies - Objective, Selection of GCB vs Non GCB vs Switchgear
2
Lessons
-
Short Circuit Studies - Objective, Selection of GCB vs Non GCB vs Switchgear
Start
-
Start
-
Day 25: SC Study - Assumption, Lump Load model, Impact on Relay coordination, Validation
1
Lesson
-
Day 25: SC Study - Assumption, Lump Load model, Impact on Relay coordination, Validation
Start
-
Real Time Case Study - Root Cause Analysis for SLG fault in 33 kV Standalone System
4
Lessons
-
Real Time Case Study - Root Cause Analysis for SLG fault in 33 kV Standalone System
Start
-
Start
-
Start
-
Start
Course Curriculum
What You’ll Learn – Real-Time Project Training
System Modeling & Inputs
- SLD creation in ETAP
- Motor/data lumping & assumptions
- Input sheet preparation
Load Flow Analysis
- Simulation setup
- PF correction & reactive compensation
- OLTC/DETC for voltage control
Short Circuit Study
- Fault current methodology (IEC 60909 / IEEE 399)
- Case studies for grid-connected & islanded systems
- Breaker adequacy checks
Relay Coordination
- Relay & CT data preparation
- TCC plotting & analysis
- Achieving selectivity across feeders and motors
Deliverables & Reports
- Report structuring
- Observations, recommendations & summary notes
- Final Q&A and wrap-up
- Electrical engineers wanting hands-on project-level study skills
- Protection & study engineers building expertise in ETAP
- Students/freshers preparing for system studies & consulting careers
- EPC, O&M, and utility engineers dealing with industrial power systems
Ready to take the first step in Load Flow, Short Circuit & Relay Coordination Studies Using ETAP
ETAP - Review:
What Past attendees are saying?
Certificate of Achievement: ETAP 100 Hr Course – Power Projects. I am pleased to announce that I have successfully completed the ETAP 100 Hr course with Power Projects. This certificate represents far more than just a formal recognition—it marks a significant milestone in my personal and professional journey. After relocating to the USA, I faced uncertainty about the direction of my career. Past six months provided valuable time for reflection and helped me gain a clearer perspective on my future path. During my research, I discovered the courses offered by Power Projects and decided to enroll. The experience was transformative: while the certificate officially recognizes 100 hours of study, I invested much more time behind the scenes to deepen my understanding of every component. The dedicated team (Special thanks to Kavitha Paramanandan) at Power Projects ensured that every question was answered thoroughly and made complex concepts easy to grasp. I would especially like to thank Selvakumar S for his unwavering support and guidance till date. Your mentorship was invaluable and truly made a difference in my learning experience. Looking forward to applying this knowledge and continuing my professional growth!
The Power System Analysis course was a great experience. I learned important concepts in electrical engineering and got hands-on training with ETAP. This helped me understand load flow analysis, short circuit studies, and more. I recommend this course to anyone looking to improve their skills in power systems!
The Power System Analysis course was a great experience. I learned important concepts in electrical engineering and got hands-on training with ETAP. Thanks for kumaraswamy Sir helped me to understand load flow analysis.
The ETAP course at Power Projects outstanding! The curriculum expertly blends theory with practical application, making complex concepts easy to grasp. Instructors provided excellent support materials for lifelong learning and were available via WhatsApp 24/7 for any queries. Hands-on labs significantly enhanced my skills. I highly recommend this course to anyone looking to deepen their understanding in the field!
Now I have been studying an ETAP course on power projects. I learned important concepts in electrical engineering and got hands-on training in ETAP. This helped me understand load flow analysis, short circuit study, relay coordination, and arc flash study. I highly recommend this training program to other power engineers and recent graduates. The company persons and management were very helpful to me during the course period.
I had the pleasure of attending three - to four free training sessions and today's comprehensive Grid compliance study and case study ..online course offered by Power Projects. I'm thoroughly impressed with the exceptional quality of the training, which was meticulously structured and packed with valuable insights. The instructors demonstrated remarkable expertise, breaking down complex concepts into easily digestible material.
I have attended the courses for the past 6 months on every Friday and week ends. The trainers were awesome, and the firm is highly talented with power systems knowledge. This training was very insightful, covering advanced power system analysis, simulation, and modeling using ETAP software. The trainers are very good and special thanks to Selva sir and Abha mam. Congratulations and thanks to your team members.
Previous Next
Ready to take the first step in Load Flow, Short Circuit & Relay Coordination Studies Using ETAP
-
Real-Time Project Training
-
- Beginner-Friendly
- Hands-On
- Report-Oriented
Buy Now
Frequently Asked Questions (FAQ)
Not sure how to get started with design engineering? want a free consulting call?
We’ve got you covered!
Fill out the form to get personalized guidance on how to:
✱ Transform your career in electrical engineering
✱ Discover the best tools and software to learn
✱ Identify the next steps to take toward design engineering
Start your journey today!
Reviews